Vehicle Lift Mode, Activating: Procedure:

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn on the ignition and activate the MMI.

-- Select the function button CAR .

-- Follow the following menu structure under >>System<< :

adaptive air suspension
SETUP

-- Select the function "vehicle lift mode" with the MMI-control knob and set to "ON".

NOTE:

Vehicle lifting mode automatically switches off again when vehicle speed exceeds 15 km/h.

When the vehicle lift mode is activated for a longer time, the pressure in the suspension strut can lower and thereby also lower the vehicle level. If necessary quickly start the engine to reactivate the vehicle lift mode.