Windshield Spray Pattern, Adjusting, Hybrid Nozzles
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
-- Align the adjusted nozzles units above the adjusting screw -2- according to the specification, using a tool with an external TORX® size 9 -3-.
-- If the spray pattern still does not meet the specifications, clean the corresponding spray nozzles. Refer to WASHER NOZZLES, ADJUSTING .
NOTE:
The water jets of a nozzle unit can only be adjusted together and the height is adjusted via an adjusting screw. It is not possible to adjust the water jets individually or to adjust just one side.