Wheel Bolts, Tightening To Specification
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm :VAG1332 , measuring range: 40 to 200 Nm
- Or: Torque Wrench 80-400Nm :VAG1576 , measuring range: 80 to 400 Nm
Testing Values and Process Specifications Table:
| Fastening Element | Tightening specification [Nm] |
|---|---|
| Wheel Bolts | 120 |
The adapter to loosen/tighten the anti-theft wheel bolts is located in the vehicle tool kit.
Procedure:
-- Tighten the wheel bolts diagonally to the specified tightening specification. Refer to WHEEL BOLTS, TIGHTENING TO SPECIFICATION for the testing values and process specifications table.
-- If the adapter from the vehicle tool kit was used for the anti-theft wheel bolts, put the adapter in the vehicle tool kit.