LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (General Maintenance (2 Of 2)) >> Maintenance >> Maintenance Work >> Vehicle Key, Checking Function And Entering Number Of Assigned Keys

Vehicle Key, Checking Function And Entering Number Of Assigned Keys

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Procedure: 

-- Separate the set of keys so that the function of each key can be checked individually.

-- Start the engine using each key separately.

-- If a vehicle key is not adapted, readapt all existing vehicle keys to the vehicle using the Guided Functions on the Vehicle Diagnostic Tester via the GeKo online connection.

NOTE:

Only store the key to be checked in the vehicle interior. Move the other keys outside of the operating range.

The engine switches off again after a few seconds if the key is not adapted. Depending on the vehicle equipment, the anti-theft immobilizer system indicator lamp or the display "SAFE" also appears in the instrument cluster.

scientia non olet · About LEMON Manuals