Underbody Trim Panels, Wheel Housing Liners, Side Sills And Lines, Checking For Damage And Proper Attachment
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
-- Check all underbody trim panels and wheel housing liners for breaks and tears.
-- Check all underbody trim panels and wheel housing liners for proper attachment by hand, and also check for any missing fasteners.
-- Inspect the side sills for any deformations.
-- Check the lines and their connections in visible areas for proper attachment and damage.
-- If there are defects, replace the damaged component or replace any missing fasteners.