LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (General Maintenance (2 Of 2)) >> Maintenance >> Maintenance Work >> Transport Mode, Checking Activation And Activating If Necessary >> Transport Mode, Activating

Transport Mode, Activating

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Procedure: 

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Select Diagnosis  mode and start diagnosis.

-- Perform the vehicle identification.

-- Deselect " Working with Guided Fault Finding  " by removing v  and pressing Accept  .

-- Switch to the " Special Functions  " tab and select the following program:

-- Start the program using Perform test...  .

-- Continue the program sequence.

NOTE:

Battery transport mode ensures that the vehicle will be able to start.

When battery transport mode is on, many functions such as the radio do not work or are limited.

scientia non olet · About LEMON Manuals