Tire Pressure Monitoring System, Storing Changed Tire Pressure Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of injury due to unintended engine start on high-voltage vehicles!
- Pay attention to the high-voltage system warning messages:
- For procedures where the ignition must be switched off, refer to PROCEDURES THAT NEED IGNITION SWITCHED ON .
After every tire pressure change or after changing the tires, the tire pressure monitoring system must be initialized.
Requirements:
- Before storing, the driving tire pressures must be correctly adjusted.
Procedure:
-- Turn on the ignition and activate the MMI.
-- Select the function button CAR .
-- Follow the following menu structure under >>System<< :
- Service & Checking
- Tire Pressure Monitoring System
- Tire Pressure, Storing
-- Activate the storing of tire pressures using the MMI control knob.