6-Cylinder Gasoline Engine 2.5L FSI / 2.8L FSI / 3.0L TFSI: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Spark Plug Removal Tool :3122B
- Puller - Ignition Coil :T40039
- Electronic Torque Wrench 3-60Nm :VAS6583 , measuring range 3 to 60 Nm
Tightening Specification Table for Installation:
| Component / Fastening Element | [Nm] |
|---|---|
| Spark plugs M12 threads | 20+5 |
| Spark plugs M14 threads | 30+5 |
| Connector strip bolts | 5 |
Removal Procedures:
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .