Step 1 - Glass Panel Seal, Cleaning and Lubricating

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the glass panel to the raised position.

-- Remove any accessible grease and dirt residue on the glass panel seal using the Cleaning Solution -D 009 401 04- and a lint-free cloth.

-- Grease the side and rear of the glass panel seal -arrows- with Special Krytox Lubricating Paste -G 052 141 A2- and a fine-pore sponge -1-. Make sure that there are no rough deposits visible after applying.

Courtesy of AUDI OF AMERICA, LLC

-- Open the glass panel all the way.

-- Using the Cleaning Solution -D 009 401 04- and a lint-free cloth, remove any grease and dirt residue from the front area of the glass panel seal that has not been greased yet.

-- Grease the front of the glass panel seal -arrow- with Special Krytox Lubricating Paste -G 052 141 A2- and a fine-pore sponge -1-. Make sure that there are no rough deposits visible after applying.

Courtesy of AUDI OF AMERICA, LLC