LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (General Maintenance (2 Of 2)) >> Maintenance >> Maintenance Work >> Seat Belts, Checking Presence Of Seat Belt Stop Buttons And Retractor Locking Function

Seat Belts, Checking Presence Of Seat Belt Stop Buttons And Retractor Locking Function

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Procedure: 

On all existing seat belts:

-- Make sure the seat belt stop buttons or the stopper clips are present.

-- Check the locking behavior of the retractors by unrolling them with a jerk.

NOTE:

If objects are secured with the seat belt (for example, a child seat), do not loosen the seat belt. Only check the locking behavior with the belt secured. Checking the stop button or stopper clip is not required in this case.

scientia non olet · About LEMON Manuals