Ribbed Belt For Sub-Assembly, Belt TENSIONER, Idler Pulleys And Belt Pulley Water Pump, Replacing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
Replace the sub-assembly ribbed belt according to the service information specifications. Refer to RIBBED BELT, REMOVING AND INSTALLING - CYNB , or RIBBED BELT, REMOVING AND INSTALLING - CTGE, CEUC , or RIBBED BELT, REMOVING AND INSTALLING - CPNB , or RIBBED BELT, REMOVING AND INSTALLING - CREC, CREH .
-- Replace the belt tensioner, idler pulley and the water pump belt pulley according to the service information specifications. Refer to OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE - CYNB , or OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE - CPNB .