Rear Spoiler Hinges, Lubricating
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Special Lubricant -G 052 172 A1-
Requirements:
- Vehicle must be at least at room temperature.
Procedure:
-- Switch on the ignition and extend the rear spoiler.
-- First clean the lubricated areas with a lint-free cloth.
-- Lubricate all the rear spoiler hinge joints at the locations shown -arrows- with Special Lubricant -G 052 172 A1-.
-- Extend and retract the rear spoiler at least five times so that the lubricant can seep in.
-- Remove any excess lubricant with a cloth.
-- Repeat the procedure on the other side.
-- Extend the rear spoiler.