Instrument Cluster, Checking Indicator Lamps

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Reading out the Diagnostic Trouble Code (DTC) memory is a repair procedure and should be charged separately.

Procedure:

-- Start the engine and wait for the vehicle function test to end.

-- Check if the indicator lamps in the instrument cluster turn on.

-- Turn the engine off.

-- For the relevant indicator lamps, read out the Diagnostic Trouble Code (DTC) memory. Refer to DTC MEMORIES: CHECKING .

NOTE:

The duration of the vehicle function test depends on the model and vehicle equipment.