Brake System, Checking Brake Hose Condition And Presence Of Bleed Screw Protective Caps

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Requirements:

When at the maximum steering angle, the brake hoses must not touch other vehicle components.
The brake hoses must not be twisted.

Procedure:

-- Make sure all brake hoses are attached properly and observe the specified requirements.

-- Check all brake hoses for chafing, porosity, bubbles and cracks.

-- Make sure the brake hose connections are seated correctly and check for corrosion and leaks.

-- If a defect is located on the brake hoses, repair or replace the affected component.

-- Check on all brake calipers if the bleed screw protective caps are present and attached.

-- Replace any missing protective caps.