LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (General Maintenance (2 Of 2)) >> Maintenance >> Maintenance Work >> Brake Fluid, Changing >> Step 3 - Clutch Slave Cylinder, Bleeding

Step 3 - Clutch Slave Cylinder, Bleeding

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Only applies to vehicles with a manual transmission.

-- There are necessary removal procedures to access other components. Refer to appropriate service information. .

-- Attach the reservoir bleeder hose -1- to the clutch slave cylinder bleeder screw.

-- Open the bleed screw and allow the appropriate amount of brake fluid to flow out. Refer to BRAKE FLUID, CHANGING  for the Testing Values and Process Specifications Table.

-- Close the bleed screw and install the cap.

   
scientia non olet · About LEMON Manuals