Brake Fluid Level, Checking
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Testing Values and Process Specifications Table:
| Service: | Fluid Level Specified Value: |
|---|---|
| Delivery service | Fluid level at the MAX mark. |
| Change brake fluid | Fluid level between the MAX and MIN mark, consistent with the wear condition of the brake pads. |
The leak test for the brake system is a repair procedure and should be charged separately.
Procedure:
-- Check the brake fluid level based on the markings -arrows- in the brake fluid reservoir.
-- Perform the following actions depending on the test result:
| Fluid level: | Evaluation / Action: |
|---|---|
| Over the MAX mark | Extract the brake fluid. |
| Under the specified level | Perform a leak test for the brake system. Refer to LEAK TEST . |
NOTE:
Due to wear and the automatic adjustment of the brake pads while driving, the brake fluid level lowers.