High Pressure Pump, Removing And Installing: Notes
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Crankshaft Turning Tool :T40257
- Wrench - 21mm :T40263
- Locking Pin :T40245
- High Pressure Pump Shaft Holder :T40248 or High Pressure Pump Shaft Holder :T40292 (depending on the version, different adapters are installed)
- High Pressure Pump Shaft Holder :T40292
- Adapter :T40314
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- O-ring - High Pressure Pump