Fuel Injectors, Removing And Installing: Notes
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Cleaning Set :VAS6811
- Pry Lever :80-200
- Puller - Unit Injector :T10055 with Puller - Unit Injector - Adapter 1 :T10055/1 and Puller - Unit Injector - Adapter 3 :T10055/3
- O-ring Assembly Sleeve :T10377
- Union Nut Socket :T40055
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- O-ring - Fuel Return Hose to Injector
- O-ring/Copper Ring - Injector to Cylinder Head Cover
- Bolt - Tension Clamp for Injector