Cable Mount, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Pull the pull knob -6- on the mount -3- and pry off the clamp -5- with a narrow screwdriver -arrow-.
-- Remove the cable -4- from the pull knob.
-- Remove the bolts -1, 2 and 7-.
-- Remove the cable bracket -1- from the mount -3- -arrow-.
-- Disconnect the connector -2- and remove the mount.