Bumper Cover Mount, Removing And Installing, AUDI A6/S6: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2014 .
-- Disconnect the connector -1-, if equipped.
-- Remove the bolts -arrows- and the front bumper cover outer mount -2-.
NOTE:
Depending on the vehicle version instead of the lower bolt a nut may be installed.