Height Adjustment:
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bolt -4-.
-- Loosen or tighten the adjusting nut -5- in stages using the: T40281 -arrows- until the gap dimension of the bumper cover -2- to the hood -3- and headlamp -1- is reached.
-- Tighten the bolt to -4- to 8 Nm.
-- Check the gap dimensions again and repeat the adjustment as first described, if needed.
-- Check the gap dimension and repeat the adjustment if necessary.