Night Vision System Camera -R212- MOUNT, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2014: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Remove the screws -2, 3, 5 and 6- and then remove the mount -4- with the Night Vision System Camera -R212-.
-- Open the clamp -7- -arrow- and remove the windshield washer fluid hose.
-- If the mount is being replaced, then remove the Night Vision System Camera -R212-. Refer to NIGHT VISION SYSTEM CAMERA, REMOVING AND INSTALLING .