LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Exterior System (Bumpers - Service Information)) >> 63 Bumpers >> Front Bumper >> Attachments, Removing And Installing >> Front Bumper Cover Mount, Removing And Installing >> Removing

Front Bumper Cover Mount, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Loosen the bolt -2- three turns.

GWWA63-10501Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness -1-.

-- Remove the bolts -3 and 5- and the mount -4- for the front bumper cover.

NOTE:

Depending on the version, instead of bolts nuts may be installed.

scientia non olet · About LEMON Manuals