Wiring Harness Repair Set - Wire Strippers :VAS1978/3: Stripping
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.
-- Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.
-- Open pliers again and remove the stripped wire end.
-- If necessary, cut wires using side-cutter function on the top of the wire stripper.