Crimping Pliers With Insert
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Wiring Harness Repair Set:VAS1978B
- Wiring Harness Repair Set - Crimping Head - 4-6mm:VAS1978/2A
- Wiring Harness Repair - Crimping Head -.35-2.5mm:VAS1978/1-1
- Wiring Harness Repair - Crimping Plier - Base Tool:VAS1978/1-2
- Wiring Harness Repair - Interchangeable Head:VAS1978/1-3
The :VAS1978/1-2 with the :VAS1978/1-1 and the :VAS1978/2A are components of the :VAS1978B . Additionally there is also the :VAS1978/1-3 . These exchangeable heads with the crimping pliers are inserted to crimp the crimp connector during a wiring harness repair.
| Color of Crimp Connectors | Color of Crimping Slot | Wire Cross-Section | Exchangeable Head |
|---|---|---|---|
| Transparent | None | 0.13 mm2 /0.35 mm2 /0.5 mm2 | :VAS1978/1-3 |
| Transparent | Yellow | 0.35 mm 2 through 0.5 mm 2 | :VAS1978/1-1 |
| Red | Red | 0.5 mm2 - 1.0 mm2 | :VAS1978/1-1 |
| Blue | Blue | 1.5 mm2 - 2.5 mm2 | :VAS1978/1-1 |
| Yellow | Yellow | 4.0 mm2 - 6.0 mm2 | :VAS1978/2A |
NOTE:
Always be sure to use the correct crimping slot for the crimping connection used.
Do not crimp wire insulation.