Starter Battery Switch-Over Relay -J580-, REMOVING AND INSTALLING - HYBRID: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the wire junction. Refer to Wire Junction -TV1-, REMOVING AND INSTALLING, VEHICLES WITH HIGH-VOLTAGE SYSTEM - HYBRID .
-- Open the retainers -arrows- with a small screwdriver and remove the cover -2- from the wire junction -1-.
-- Remove the nut -3-.
-- Remove the Starter Battery Switch-Over Relay -J580- -2- from the wire junction -1-.