LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Exterior Lights & Switches Systems (Service Information)) >> Exterior Lights, Switches >> Steering Column Switch Module >> Steering Column Electronics Control Module -J527-, REMOVING AND INSTALLING >> Installing

Steering Column Electronics Control Module -J527-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

-- Make sure all retaining hooks and connectors are engaged securely.

-- The steering angle sensor must be adapted in "Guided Fault Finding" or "Guided Functions" after replacing the return spring with slip ring. Refer to Vehicle Diagnostic Tester.

scientia non olet · About LEMON Manuals