Headlamp Range Control Module, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the driver side instrument panel cover. Refer to OVERVIEW - DRIVER SIDE INSTRUMENT PANEL COVER .
-- Open the tab in direction of -arrow A- and remove the control module -2- from the mount -1- in direction of -arrow B-.
-- Disconnect the connector -3-.
-- Press the retaining tab -1- to disconnect the connector, turn the retaining bracket in direction of -arrow- and remove the connector.