Seat Cushion Blower Fan Bracket, Removing And Installing, Multi-Contour Seat: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fasten the front seat on the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
-- Remove the padding at the side and rear of the seat pan. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
-- Remove the seat cushion fan. Refer to SEAT CUSHION BLOWER FAN, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
-- Remove the bolts -1-, -2- and the fan grille -3-.
-- Release the retainer -arrow A-.
-- Move the bracket -1- downward -arrow B-, disengage is from the lower seat frame and remove it.