Seat Adjustment Control Head, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Carefully pry the actuator -1- using the :3409 from the retainer.
-- Repeat the process on the opposite side of the gap cover.
-- Repeat the procedure for the second actuator.
-- Remove the sill-side trim:
- Standard seat/Sport seat/Super Sport seat. Refer to SEAT SIDE TRIM ON SILL PANEL SIDE, REMOVING AND INSTALLING, FRONT SEAT (POWER) .
- For a Multi-contour seat. Refer to SEAT SIDE TRIM ON SILL PANEL SIDE/FRONT SEAT TRIM, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
Standard Seat/Sport Seat/Super Sport Seat
-- Remove the bolts -3 to 5-.
-- Remove the control -1- from the trim -2- on the sill-side.
Multi-Contour Seat
-- Remove the bolts -3 to 5-.
-- Remove the switch module -1- from the trim -2- on the sill-side.