LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 956 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Safety Ground Lock, Removing And Installing >> Removing

Safety Ground Lock, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-11134Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way forward/up.

-- Remove the bolts -1-.

-- Disengage the retaining plate -2- on the lower seat frame -arrow- and remove.

GWWA72-11135Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of damage to the bushing in the bearing point (safety ground lock).

  • The bushing cannot be replaced with workshop materials.
  • If a bushing is damaged, the assembly part must be replaced.

-- Remove safety ground lock -1- from the mounting pin on the seat pan lower frame -2-.

scientia non olet · About LEMON Manuals