LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 956 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Release Cable Retainer/Seat Forward/Back Adjustment Lever And Spring, Removing And Installing >> Installing

Release Cable Retainer/Seat Forward/Back Adjustment Lever And Spring, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order of removal, noting the following:

NOTE:

The release cable retainer lever is the same for the driver and front passenger seat. The spring is different for the driver and front passenger seat.