LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 956 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Overview - Seat Pan >> Overview - Seat Pan, Modular Wiring Routing

Overview - Seat Pan, Modular Wiring Routing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Pan, Modular Wiring Routing Exploded View
GWWA72-11307Courtesy of AUDI OF AMERICA, LLC
  1. Rear Wiring Bracket
    • Attach back at the same location when installing
  2. Front Seat
  3. Front Wiring Bracket
    • Attach back at the same location when installing
  4. Wiring Harness
    • Do not twist installed wires
  5. Corrugated Tube Lower Section
    • Must end flush with the rear cable holder
  6. Cable Tie
    • Attach back at the same location when installing
  7. Corrugated Tube Upper Section
    • Must end flush with the rear cable holder
scientia non olet · About LEMON Manuals