LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 956 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Overview - Front Backrest >> Overview - Front Backrest, Backrest Adjustment Motor

Overview - Front Backrest, Backrest Adjustment Motor

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For the sake of clarity, seat cushion and seat cover are not depicted.

Fig 1: Front Backrest, Backrest Adjustment Motor Exploded View
GWWA72-11165Courtesy of AUDI OF AMERICA, LLC
  1. Shaft
    • The threaded hole for the nut -8- must be cleaned, for example, with a thread tap.
    • Coat the threads on the shaft with locking fluid before installing the nut. For the correct locking fluid. Refer to the Parts information.
  2. Driver Backrest Adjustment Motor -V45-
  3. Rivet
    • Quantity: 2
  4. Bracket
  5. Bolt
    • 3.7 Nm
    • Replace
    • Clean the threaded hole with a thread tap.
    • Use locking fluid when installing the bolt. For the correct locking fluid. Refer to the Parts information.
  6. Backrest Frame
  7. Washer
  8. Nut
    • 6 Nm
    • Replace
scientia non olet · About LEMON Manuals