Headrest Guide, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The headrest guide can only be inserted in one position.

The guide tab -3- on the headrest guide must engage in cut-out of mount on the backrest frame.

Make sure the retaining tab(s) engage(s) correctly in backrest frame.

Installation is performed in reverse order of removal, while noting the following:

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
Observe all measures when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .