Front Backrest Fan, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Standard Seat/Sport Seat/Super Sport Seat

-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT .

Upper Fan

-- Free up the connector -1- and disconnect.

-- Carefully pry the backrest fan -2- out of the backrest cushion using the :3409 -arrow-.

Lower Fan

Courtesy of AUDI OF AMERICA, LLC

-- Adjust the lumbar support to the highest curve while moving the slider -1- all the way down -arrow A-.

NOTE:

Ignore item -2-.

-- Disconnect and free up the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Carefully pry the backrest fan -2- out of the backrest cushion using the :3409 -arrow-.

Multi-Contour Seat

Courtesy of AUDI OF AMERICA, LLC

-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .

-- Disconnect the connector -2- and free it up.

-- Spray the rubber protrusions -arrows- of the elastic blower fan mount -1- with silicon-free lubricating spray.

-- Detach blower fan from the rubber protrusions and remove it.