LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Seats System (Upholstery & Covers - Service Information)) >> Seat Upholstery, Covers >> Rear Seat Covers And Cushions >> Seat Heating Element, Removing And Installing >> Seat Heating Element, Removing And Installing, Multi-Contour Seat >> Installing

Seat Heating Element, Removing And Installing, Multi-Contour Seat: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Align the new heating elements on the seat cushion.

-- Remove protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Bond heating elements in the sequence -1-, -2-, -4- so that they align with the old heating elements and are wrinkle free.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Install in reverse order of removal. 

scientia non olet · About LEMON Manuals