Headrest Cover And Cushion, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear headrest. Refer to HEADREST, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
-- Open the lock by prying the upper side of the cover with the flat channel -1- loose from the headrest support using a screwdriver and removing it.
-- Pry lower cover side with the U-channel -2- loose from the headrest support and remove it.
-- Pull off the cover -3- and cushion over the headrest support -4- -arrow- and remove headrest support.
-- Remove cushion from the cover.