Cover And Cushion, Removing And Installing, Rear Bench Seat: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear bench seat. Refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .

-- 2-seat rear bench seat: Remove the center storage compartment. Refer to BENCH SEAT CENTER STORAGE COMPARTMENT, REMOVING AND INSTALLING .

-- Vehicles with a Multi-contour seat: remove the seat cushion clips -1- from the seat frame -2-.

-- Vehicles equipped with the rear seat backrest blower fan: unclip the air guide mat connection -1- from the rear seat backrest blower fan in direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Cut the upholstery clips -2- all the way around the seat frame with pliers.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat cover -1- and seat cushion from the seat frame.

2-Person Rear Seat Bench

Courtesy of AUDI OF AMERICA, LLC

-- Cut the upholstery clips -2- all the way around the seat frame with pliers.

-- Disengage the protective strip -3- from the seat frame.

-- Remove the seat cover -1- and seat cushion from the seat frame.