Driver Seat Heating Element -Z6- /Front Passenger Seat Heating Element -Z8-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Separate the seat cover from the seat cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .

Standard Seat

-- Disconnect the wire -2- directly from the old heating element -1-.

NOTE:

The old heating elements remain on the cushion and will be covered over by the new heating element.

Vehicles with Seat Ventilation

Courtesy of AUDI OF AMERICA, LLC

-- Vehicles with a front passenger seat occupant sensor: loosen the passenger occupant detection sensor -3- carefully from the heating element -1-.

-- Loosen the heating elements -A, B and C- carefully from the adhesive.

-- Cut the connecting pieces -arrows- and remove the heating elements.

NOTE:

The old heating elements -D- remain on the cushion -2- and will be covered over by the new heating element.

Sport Seat/Super Sport Seat

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the wire -3- directly from the old heating element -2-.

NOTE:

The old heating elements remain on the seat cushion -1-, -4- and will be covered over by the new heating elements.