LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Seats System (Upholstery & Covers - Service Information)) >> Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Driver Backrest Heating Element -Z7- /Front Passenger Backrest Heating Element -Z9-, REMOVING AND INSTALLING >> Installing

Driver Backrest Heating Element -Z7- /Front Passenger Backrest Heating Element -Z9-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Align the new heating element on the backrest cushion.

-- Peel the protective film off the heating element. Be careful not to damage the heating element.

-- Glue the heating element so that they align with the old heating element and free of wrinkles.

Install in reverse order of removal. 

scientia non olet · About LEMON Manuals