LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 954 (Seats System (Frames- Service Information - 2 Of 2)) >> Seat Frames >> Rear Seats >> Rear Seat Backrest, Removing And Installing >> Mount/Sleeve/Pins, Removing And Installing, Rear Seat Backrest >> Removing Center Support

Removing Center Support

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The rear seat backrest only needs to be disengaged from the mounts to remove and install the center bracket.

-- Remove the bolts -1-.

-- Remove the center support -2- from the floor panel -3-.

scientia non olet · About LEMON Manuals