Overview - Locking Mechanism, AVANT
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Release Cable
- For backrest release
- Removing and installing. Refer to REAR SEAT BACKREST RELEASE CABLE/CONNECTOR STATION, REMOVING AND INSTALLING .
- Connector Station
- For the release
- Removing and installing. Refer to REAR SEAT BACKREST RELEASE CABLE/CONNECTOR STATION, REMOVING AND INSTALLING .
- Clip on the vehicle underbody
- Release Cable
- For locking
- Removing and installing. Refer to REAR SEAT BACKREST LOCKING MECHANISM, REMOVING AND INSTALLING .
- Bolt
- 5.2 Nm
- Quantity: 2
- Luggage Compartment Lamp
- Removing and installing. Refer to Luggage Compartment Lamp -W3-, REMOVING AND INSTALLING, AVANT .
- Bolt
- 2.5 Nm
- Cap
- Press on until it engages audibly
- Release
- For backrest release
- Removing and installing. Refer to REAR SEAT BACKREST RELEASE, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Luggage Compartment Side Trim Panel
- Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, AVANT .
- Bracket
- For release for the backrest release
- Removing and installing. Refer to BACKREST RELEASE BRACKET, REMOVING AND INSTALLING .
- Trim
- For locking
- Removing and installing. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Locking Mechanism
- For the rear seat backrest
- Removing and installing. Refer to REAR SEAT BACKREST LOCKING MECHANISM, REMOVING AND INSTALLING .
- Bolt
- 25 Nm
- Quantity: 2
- Rear Seat Backrest