Pass-Through Door Lock Cylinder, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Flip the center armrest up.
CAUTION:
Only remove and install the lock cylinder with the key inserted correctly. If that is not done, the tumblers and compression springs can fall out and the lock cylinder will be ruined.
-- Insert the key -3- into the lock cylinder -2- correctly.
-- Turn the key counterclockwise 90° -3-.
-- Push the pass-through handle -1- up as far as the stop.
-- Release the tabs -arrows- and press the lock cylinder -2- with the key -3- out of the handle.