Overview - Compressor, Multi-Contour Seat Through 08/2012

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Compressor, Multi-Contour Seat Exploded View

Courtesy of AUDI OF AMERICA, LLC

Nut
- 3.5 Nm
- Quantity: 3
- Brace rubber-metal mount while tightening
Spring Washer
- Quantity: 3
Washer
- Quantity: 3
Bonded Rubber Bushing
- Quantity: 3
- Removing and installing. Refer to MULTI-CONTOUR SEAT COMPRESSOR BONDED RUBBER BUSHING, REMOVING AND INSTALLING, THROUGH 08/2012 .
- Do not install under tension or twisted
Bracket
- For front trim, compressor and Multi-contour seat control module
- Removing and installing. Refer to FRONT SEAT TRIM BRACKET/COMPRESSOR/CONTROL MODULE, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
Rivet
- Quantity: 3
Front Seat
Pneumatic Line
Driver Multi-contour Seat Compressor -V439-
- Front passenger side: Front Passenger Multi-contour Seat Compressor -V440-
- Removing and installing. Refer to MULTI-CONTOUR SEAT COMPRESSORS, REMOVING AND INSTALLING, THROUGH 08/2012 .