Component Location Overview - Heater And A/C Unit, Disassembling And Assembling
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Air Distribution Housing
- Depending on vehicle equipment level with or without the Auxiliary Heater Heating Element -Z35-
- Removing and installing. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
- Evaporator Housing
- Removing and installing. Refer to EVAPORATOR HOUSING, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- Tightening specification. Refer to OVERVIEW - ATTACHMENTS FOR HEATER AND A/C UNIT AND AIR INTAKE HOUSING .
- Air Intake Manifold
- Removing and installing. Refer to AIR INTAKE MANIFOLD, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to OVERVIEW - HEATER AND A/C UNIT AIR INTAKE HOUSING .
- Air Intake Duct
- There are different versions. Refer to the Parts information.
- Overview. Refer to OVERVIEW - HEATER AND A/C UNIT AIR INTAKE HOUSING .
- Wiring Harness
- There are different versions. Refer to the Parts information.