Front Hood Grille: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install each part in the reverse order of removal.

NOTE: Insert the hooks (B) of the front hood duct into holes (A) of the front hood.

Fig 1: Inserting Hooks Of Front Hood Duct Into Holes Of Front Hood

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Refer to A: COMPONENT . < Ref. to FRONT HOOD GRILLE , COMPONENT, General Description. >