Overview - Condenser, With Receiver/Dryer And Dryer Cartridge
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
There are different versions of the condenser. Vehicles without a high-voltage system and the Audi A6 Hybrid have an attached or integrated receiver/dryer. Refer to the Parts information.
For this model line, only vehicles with a high-voltage system were or are currently being manufactured that had or are having the refrigerant circuit charged with refrigerant R134a.
- Plug
- 2 Nm
- There are different versions. Refer to the Parts information.
- With air filter (strainer)
- Replace the plug if it is damaged
- Coat with refrigerant oil before installing. Refer to REFRIGERANT CIRCUIT SEALS .
- O-Ring Seal
- Replacing. For the correct version. Refer to the Parts information.
- Coat with refrigerant oil before installing. Refer to REFRIGERANT CIRCUIT SEALS .
- Dryer Cartridge
- There are different versions. Refer to the Parts information.
- Removing and Installing. Refer to DRYER BAG/DRYER CARTRIDGE, REMOVING AND INSTALLING .
- Receiver/Dryer
- There are different versions. Refer to the Parts information.
- Is integrated on this version of the condenser
- Condenser
- There are different versions. Refer to the Parts information.
- Refrigerant line, disconnecting and reconnecting. Refer to REFRIGERANT LINES, DISCONNECTING AND CONNECTING AT CONDENSER .
- Removing and Installing. Refer to CONDENSER, REMOVING AND INSTALLING .