LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 948 (Interior Trim System (Service Information)) >> Interior Trim >> Roof Trim Panels >> Roof End Strip, Removing And Installing >> Installing

Roof End Strip, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA70-11015Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal. Note The Following: 

-- Mount the rear roof panel trim -1- so that the hooks touch the D-pillar trim.

-- Position the rear roof panel trim on the pins, then press on it until the clips audibly engage.

scientia non olet · About LEMON Manuals