Rear Shelf, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal. Note The Following:

-- Insert the rear shelf -1- into the rear window frame and tighten the screws.

The pins on the rear shelf must catch on the holding mounts and remain in place -arrow- on the rear window frame.